THE CERAMIC COATING FOR CARS THAT ONLY NEEDS ONE LAYER.
1 Layer
3D Hydrophobic Structure
7-Year Warranty
Professional Installation
WHAT ONE DOES FOR YOUR CAR
Deeper gloss, and a car that stays clean longer
Bare paint is porous, and everything the road throws at it settles in. Ceramic Pro ONE seals the surface in a single layer, giving dirt, water and road grime far less to hold onto.
Because the hydrophobic structure runs through the whole coating rather than sitting on top of it, that performance doesn’t wear off with the first few washes.
Water rolls off instead of sitting on the paint
Rain sheets away and takes loose dirt with it, so spotting and streaking are far less of a problem.
Protection from oxidation
Sun, heat and airborne contaminants are what dull and fade unprotected paint. ONE puts a hard barrier between your clear coat and all of it.
Premium gloss that holds
A deeper, sharper reflection than bare clear coat, engineered to last rather than fade after a season.
A second layer exists to make up for what the first one lacks. Ceramic Pro ONE is built so there’s nothing to make up for — the hydrophobic structure is distributed through the entire coating, and the bonding technology grips bare paint directly.
Conventional two-layer system
Hydrophobic performance sits near the surface, above a base coat that only handles adhesion.
As the surface wears, the layer doing the work starts to go with it.
With the top gone, what is left is a base coat that was never repelling anything.
Ceramic Pro ONE
The 3D Hydrophobic Structure runs the full depth, bonded straight to the paint. No base coat needed.
Wear the surface and there is still structure underneath doing the same job.
The coating keeps performing, because performance was never only on top.
01
Hydrophobic all the way down
Most coatings concentrate their water-repelling chemistry near the surface. ONE’s 3D Hydrophobic Structure carries it through the full thickness of the layer.
02
Bonds without base coat
Advanced bonding technology grips the paint directly, so the adhesion layer that two-part systems depend on isn’t part of the equation.
03
One product, one pass
Fewer layers means fewer variables in the install — and a finish that doesn’t depend on two products curing correctly together.
HOW IT COMPARES
One layer, and still the longest protection on the list
Where a bottle off the shelf and a typical professional coating land next to Ceramic Pro ONE.
FEATURE
DIY / RETAIL
TYPICAL PROFESSIONAL COATING
CERAMIC PRO ONE
Durability
1–2 years
2–5 years
7 years
Layers on paint
1–2
2+, or base and top
1
Installation
Vehicle owner
Certified installer
Certified installer
Surfaces
Paint
Paint, plastics
Paint, plastics, PPF, vinyl
Warranty
None
Varies, often package level
7 years, product level
On the vehicle record
No
Rarely
CARFAX verified
Durability
DIY / RETAIL
1–2 years
TYPICAL PROFESSIONAL COATING
2-5 years
CERAMIC PRO ONE
7 years
Layers on Paint
DIY / RETAIL
1–2
TYPICAL PROFESSIONAL COATING
2+, or base and top
CERAMIC PRO ONE
1
Installation
DIY / RETAIL
Vehicle owner
TYPICAL PROFESSIONAL COATING
Certified installer
CERAMIC PRO ONE
Certified installer
Surfaces
DIY / RETAIL
Paint
TYPICAL PROFESSIONAL COATING
Paint, plastics
CERAMIC PRO ONE
Paint, plastics, PPF, vinyl
Warranty
DIY / RETAIL
None
TYPICAL PROFESSIONAL COATING
Varies, often package level
CERAMIC PRO ONE
7 years, product level
On the vehicle record
DIY / RETAIL
None
TYPICAL PROFESSIONAL COATING
Rarely
CERAMIC PRO ONE
CARFAX verified
DIY and typical professional figures are general category ranges and vary by product, preparation and care.
SURFACES IT COVERS
One bottle for the whole exterior
Most coatings are formulated for paint and stop there. ONE is engineered for four different exterior surfaces, so a single product finishes the car.
Automotive paint
The factory finish and any respray — sealed in a single layer, with the gloss left sharper than bare clear coat.
Exterior plastics
Trim, bumpers and unpainted panels — the surfaces that grey out and chalk first when they’re left unprotected.
Paint Protection Film
Coat over PPF to add hydrophobic performance and gloss on top of the film’s impact protection.
Vinyl wraps
Gloss, satin and colour-change wraps — protected without changing the finish the wrap was chosen for.
Four surfaces, one product, one layer. Professional installation on all of them.
Covered for seven years, as long as it's looked after
COVERAGE
The warranty is written at the product level, so it follows the coating on your vehicle rather than a package you bought. An annual maintenance inspection at a certified installer is what keeps it active.
Ceramic Pro ONE is installed only by certified professionals, and every application is registered when the work is completed.
QUESTIONS
Before you book it in
The things people ask most about Ceramic Pro ONE. Anything else, your local certified installer can answer for your specific vehicle.
Ceramic Pro ONE is a true single-layer ceramic coating for cars. It is built on Ceramic Pro’s 3D Hydrophobic Structure and advanced bonding technology, delivering gloss, water repellency and long-term protection from a single application.
ONE’s bonding technology grips the surface directly, so a separate adhesion layer is not needed in most applications. Its hydrophobic performance is distributed throughout the entire coating.